Stock Number: EQU003531
Make: Manitou
Model: M50.4
Year: 2012

Stock Number: 2-16-230162
Make: Terex-Comedil
Model: CBR36H-4
Year: 2006

Stock Number: 209010
Make: Jungheinrich
Model: EJE 120
Year: 2015

Stock Number: 232190
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: 232137
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: 206191
Make: CAT
Year: 2011

Stock Number: 208002
Make: Hyundai
Model: 110D-7A
Year: 2014

Stock Number: EQC006142
Make: Enersys
Model: ES3-18-1200

Stock Number: 2-16-600275
Make: Liebherr
Model: 132HC
Year: 1981

Stock Number: EQU000653
Make: CAT
Model: 2ET3000
Year: 2011

Stock Number: 206216
Make: CAT
Model: GC40K-STR
Year: 2012

Stock Number: 2-18-ED143390
Model: WG3-12-550

Haulotte Straight Boom Lifts

Haulotte Straight Boom Lifts

Telehandlers are machinery which are meant to operate in rough terrain, however, that doesn't mean that they can be driven without any consideration for the environment. These kinds of machines have a much greater risk of tipping over or load loss when they are traveling on slopes.

When traveling on a slope, make sure that you move slowly with the equipment while also keeping the load low. Downshift to 4WD and a lower gear, prior to getting on the slope. Utilizing the engine brake will actually help to control the speed of the telehandlers. Try to avoid turning on a slope if possible. If you need to make the turn, use extreme caution and take it as wide as possible.

Under any circumstances, do not drive across extremely steep slopes. Ascend and descend slopes with the heavy end of the telehandler pointing up the incline. Even when the forks have no load, the machine's counterweighted rear is quite heavy; therefore, it can be required to drive in reverse up slopes. Once the telehandler is carrying a cargo, the front of the unit becomes the heavy end, and you could back the machine down the slopes.

On a mixed jobsite, operator training is really essential. The coordinated steering equipment, along with the rear-pivot equipment normally operate on the same jobsite where everyone is allowed to utilize all of the machines. In this case, an individual who is used to using a coordinated steer equipment could jump onto a rear-pivot machinery. A really key distinction between how these two units operate depends on what part of the equipment extends outside of the turning radius.

  • CAT Reach Stackers
    For railway handling, this might require larger trucks that are outfitted with both a longer reach and higher lift capacity. You might ... More
  • Hyster Large Capacity Forklifts
    Big and Jumbo Hyster provides a series of masted top pick trucks, the H1050-1150D-CH series, which could handle as much as 88,185 ... More
  • Toyota Order Picker Forklifts
    Among the main problems for many businesses nowadays is effective order picking. The BT Optio Series has been designed by Toyota ... More
  • Daewoo Diesel Forklifts
    A forklift is an important piece of machinery in the material handling business. Also referred to as a powered industrial truck, a ... More
  • Skyjack Articulating Boom Lifts
    What Precisely Is an Articulating Boom Lift? The articulated boom lift is a heavy duty equipment capable of performing various tasks ... More