In the majority of situations, most people spend quite a bit of money purchasing their lift truck. Thus, it is extremely essential to take proper care of it so as to protect your investment well into the long run. It is really a great idea to know the procedures that are undertaken in taking care of and maintaining this equipment.
By starting up the forklift and listening carefully how it runs is amongst the best ways to tell how good the engine is performing. For example, if there are any misses or knocks, the machine is faulty and this must raise several concerns. What's more listen closely for any squealing sounds that come from the belts as these noises would provide you with a wealth of information.
When performing maintenance, several of the main parts you will need to pay attention to include the safety warning devices, horn, the lights, the gauges and the overhead guard. Any burnt out light bulbs or faulty parts should be replaced as soon as they are noticed. It is also vital to inspect the wiring.
The battery compartment terminals must be cleaned after the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery must be checked so as to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The transmission filter, fuel filters and the hydraulic filter must be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
After the oil change is done and the filters have been replaced, a visual inspection of the drive axle needs to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Check the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Then, inspect every other component of the equipment like the wheels. If any type of problem or fault is detected, be certain to deal with it immediately in order to make certain the machine is running at its safest and optimum levels.