During the latter part of the 1990's, a Nissan Propane Forklift would have cost approximately $11,000 to $14,000 to buy a brand new one. You can now buy a second-hand model with this amount, with less than 5,000 operating hours and has approximately 15 feet of lifting capacity and cushion tires. However, a used Nissan forklift truck which has less than 5,000 hours can be found for under $7,000. This alternative may be a little bit of an older model than some others, but remember; everything revolves around the operating hours. A unit like this would probably have a fairly good load capacity of roughly 5,000 lbs.
Newer Nissan forklifts from the year 2005 to the current year, can be found priced near $10,000. Typically, these models would have a standard lift capacity ranging from 4,000 to 5,000 pounds. Usually, a unit similar to this will run smoothly and have cushion tires. Of course, newer models normally run smoother compared to older ones.
Kinds of Forklifts
The forklift is usually categorized in 2 separate manners: by the structure of the lift truck and the type of fuel it takes. Based on structure, the following kinds of forklifts are amongst the most common:
Standard Forklift: Standard forklifts consist of the familiar warehouse forklift. These types of forklifts offer a lifting capacity of 3,000 to 5,000 pounds. They have a height capacity of around 20 feet.
Reach Forklift: Usually known as a narrow aisle forklift, the reach forklift is the kind of machine which is found in distribution centers and warehouses where space is at a premium. Narrow construction means that it can not carry as much as a typical lift truck unit, however, it has an extendable mast that can easily lift loads roughly 40 feet.
Telescopic Forklift: Telescopic forklifts are also known as telehandlers, telescopic handler or extendable reach forklifts. These types forklift trucks are a more rugged and heavy-duty version of a regular forklift. These models offer a telescopic boom which is capable of being extended out and raised up. Usually, these models are used on rough terrain. They could handle loads up to 70 feet high and could move loads weighing over 30,000 pounds. handle loads up to 70 feet high
Straight Mast Forklift: The straight mast forklift is most usually utilized to perform tasks on rough terrain. These kinds of forklifts could only move loads vertically, not like a telescopic model. These units can reach a height of 10 to 30 feet, while lifting loads up to 12,000 pounds.
|
|
